An HNI database by city groups records by where a person lives or where a company is registered. India's millionaire households cluster hard. Mumbai holds 1,42,000 of them and New Delhi holds 68,200. Coverage claims are easy to make and hard to check, so this guide gives you five tests that take about ten minutes each.
Most firms that sell city-level prospect data in India describe their coverage in one word. The word is a city name. On its own, that word carries very little information.
A record can be tied to a city in several ways. It can carry a registered office address. It can carry a location a person typed into a profile. It can carry a district from a project filing. Each of those means something different, and only one of them is a checkable fact.
This guide shows where India's wealth actually sits, which public records can place a person or a company in a city, and how to test any coverage claim you are given.
How is HNI wealth spread across Indian cities?
India had 8,71,700 dollar-millionaire households in 2025. That is 0.31% of all Indian households, and it is up 90% from 4,58,000 in 2021. The figures come from the Mercedes-Benz Hurun India Wealth Report 2025, published on 17 September 2025.
The spread matters more than the total. Wealth sits in a small number of cities and a small number of states.
What does the city table show?
The report ranks cities by millionaire households. These are the figures confirmed in more than one published source.
Rank | City | Millionaire households |
1 | Mumbai | 1,42,000 |
2 | New Delhi | 68,200 |
3 | Bengaluru | 31,600 |
Mumbai carries most of Maharashtra's total. The state figure is 1,78,600, which means the city holds roughly four out of every five millionaire households in the state.
New Delhi here means the city, not the wider National Capital Region. Delhi as a territory is counted at around 79,800. A page about precision should not blur that line, so this guide uses the city figure and says which one it is using.
Why do seven tier-2 cities sit in the top ten?
This is the finding that matters most for coverage. Seven of the top ten cities by millionaire households are not the metros people assume. They are Ahmedabad, Surat, Jaipur, Vadodara, Nagpur, Visakhapatnam and Lucknow.
That list is the reason a page like this has to exist. A firm covering Mumbai, Delhi and Bengaluru and stopping there has covered three cities and missed seven of the ten largest pools. More on where that growth is heading sits in the fifty towns where the next wave of crorepatis will come from.
What do the top ten states account for?
The top ten states hold 79% of all millionaire households in India. Maharashtra leads at 1,78,600. Tamil Nadu holds 72,600, Karnataka 68,800 and Gujarat 68,300.
That concentration is useful for planning. It also explains why state coverage and city coverage get mixed together in vendor claims.
What can this table not tell you?
It cannot tell you how many of those households have a contactable person attached. It cannot tell you when any record was last checked. It cannot tell you whether one household is one person or a family of four.
Those three gaps are the subject of the rest of this page.
What does city coverage actually mean?
Coverage is a measurement. A city name is a label. They are not the same thing, and one is often used to imply the other.
What is the difference between a record and an address?
An address is a fact you can point at. A record is a set of fields. A record with a registered office address in Pune is in Pune in a way that a record with "Pune" typed into a city field is not.
One can be checked against a public register. The other cannot be checked at all.
Why is "we cover fifty cities" not a measurement?
Because it has no denominator and no date. Fifty cities could mean fifty records or fifty thousand. It could mean this week or three years ago.
Our own published coverage runs across eleven metros and more than fifty tier-2 cities. That is a breadth claim, and breadth is not depth. A buyer should ask both questions, including of us. The case for how far that footprint reaches into smaller places is made in why firms keep missing small-city HNIs.
What frame does the finance industry already use for cities?
Mutual fund distribution splits India into the top thirty cities and everything beyond them. AMFI publishes the list of top thirty cities with the PIN codes mapped to each one. It is one recognised way to draw the line, and it is worth knowing when a vendor says "top cities" without naming them.
How often should a city be refreshed?
More often than most vendors will admit, and the right cadence differs by field. A registered office changes when a company moves, which is not often. A phone number changes far more often than that. A directorship changes on the day the filing is accepted.
So one refresh date for a whole record is a weak measure. Ask which fields were refreshed, and when, rather than whether the record was touched at all. A record touched last week carrying a phone number from 2023 is older than it looks.
How would you write a city claim you can defend?
Name one city. Give a number, a date and a source field. Say what share of those records has a current contact.
A claim built that way survives scrutiny. A claim built on a list of city names does not, because there is nothing in it to check.
Which public records in India actually resolve to a city?
This is the part that decides whether a city claim is real. Not every public record carries a city. Some carry a state and nothing finer than that.
Which company records do carry a city?
Company records do. The Ministry of Corporate Affairs publishes each company's registered office address broken into building, area, city or town, district, state and PIN code. That is a full address, and the city inside it can be checked.
Exchange filings carry the same registered office for listed companies. Both are company-level facts, which is the important part.
Which project records do carry a city?
RERA project registrations do. Each registration records the project address, the district, the city or town, and the name of the promoter behind it.
For anyone covering developers, this is the cleanest city-level link available, because it ties a named person to a named project in a named place. It is also why a city query so often leans towards property.
What gives you a state and nothing finer?
GST registration does, and this surprises most people. A GSTIN is fifteen characters. The first two are a state code taken from the Census numbering. The next ten are the PAN of the business. The last three are an entity code and a check digit.
There is no city anywhere in a GSTIN. A Maharashtra GSTIN tells you Maharashtra. It cannot tell you Mumbai rather than Nagpur, and no amount of processing will recover that.
SEBI disclosures work at company and PAN level. They do not place a person in a city either.
Why is a city easy for a company and hard for a person?
Because company records publish an address and personal records mostly do not. MCA public view shows a director's name, DIN, role, appointment date and status. It often masks or omits the residential address, and it never publishes a phone number or an email.
So a vendor claiming city-level coverage over individuals is not getting that city from a registered address. It is coming from somewhere else, and asking where is entirely fair. That question sits underneath how to check whether HNI data is accurate.
How do you test a city coverage claim before you buy?
Five questions, asked in this order, about one city. The answers will tell you more than any sales deck will.
One: does each record carry a registered address or a stated city?
Ask what field the city comes from. If the answer is a registered office, the city is checkable. If the answer is a profile field or an inference, it is a label and it will drift.
Two: what share of records in that city have a current contact?
A record with no working contact is not coverage. It is a row. Ask for the share with a reachable phone or email today, in that one city, and not nationally.
National percentages hide city-level holes. A strong national average can sit on top of a city where almost nothing is current.
Three: what is the most recent refresh date for that city?
Ask for the date, per city. A vendor with a real process knows it without checking. A vendor selling a file will offer a compile date from last year and hope the question moves on.
Four: how many records carry an event in the last ninety days?
An event is a reason to call. A new directorship, a share sale, a project registration, a filing. Records without events are a directory, and a directory does not start conversations. Event-driven prospecting beats a static list for precisely this reason.
Five: are these households or individuals?
India's millionaire count is counted in households. A database is built of people. One household can produce four records or one, and the same household can appear twice under two spellings of the same name.
Ask which unit the vendor counts in. If they count households and sell individuals, the city total and the record total will never reconcile, and the gap will look like missing coverage when it is really two different measurements. For how net worth itself gets estimated when no filing states it, see how to find the net worth of an HNI.
What does a good answer sound like?
A good answer is specific, dated and narrow. It names one city. It gives a number and a date. It states what share has a current contact and what share carries a recent event.
A weak answer is broad, undated and national. It lists fifty city names, quotes one total for the country, and offers no per-city figure at all. The fuller set of buying checks is set out in the HNI database buying guide.
What is actually inside a city-sliced file?
City-sliced contact files are sold as products. They deserve a fair description, because they are one of the things a buyer will run into.
What is the city download product?
It is a fixed file, named after a city and a year, sold once. It arrives as a spreadsheet. The city in the name is the grouping, and the grouping is usually a stated location rather than a registered address.
You get rows. You do not get a refresh process, and you do not get a reason to call any of those rows this month.
Why is a city file not city coverage?
Because a file is a snapshot with a label on it. Coverage is a live process that keeps a city current. A file is a moment that has already passed by the time it reaches you.
Files also travel. The same city file can be sold many times over, which means the people inside it may already have heard from someone else this quarter. That risk is set out in what an intelligence layer adds to raw data.
Which cities should a firm cover first?
Three sensible orders. They often disagree, and when they do, the third one usually wins.
Start where the households are
Mumbai, New Delhi and Bengaluru hold the largest pools. Maharashtra and Gujarat hold the largest state totals. If the goal is raw addressable volume, this order is hard to argue with.
Start where the events are
Events cluster differently from wealth. A city with heavy IPO and funding activity produces more signals per person than a city holding older and quieter money. If your motion depends on having a reason to call, sort cities by signal volume instead of by household count. The HNI migration map shows how quickly those patterns shift.
Start where your own clients already are
The best order is usually the one your own book already describes. A firm with thirty clients in Surat and two in Chennai has a clearer reason to go deep in Surat than any national table can supply. The client side of that picture is on the HNI clients page.
That is why the fifth test matters more than the first three. Who counts as wealthy is settled in how India defines an HNI, and the answer changes what you are counting.
Why does the same city look different in two vendors' claims?
Because they are counting different things inside different boundaries. Neither vendor may be lying, and the numbers still will not match.
Metro boundary or municipal boundary?
Mumbai, Thane and Navi Mumbai sit inside one continuous urban area and outside three separate municipal boundaries. A vendor counting the metro will report far more than a vendor counting the municipal corporation area alone.
Ask which boundary the number uses. That single question explains most of the gap between competing city claims, and it costs one sentence to ask.
Household or individual?
India counts 8,71,700 millionaire households. A people-level database counts people. The two totals are not comparable and should never be placed side by side in the same table.
How do the vendor categories differ?
They differ in where the city field comes from. That is the honest comparison, and it is more useful than a ranking.
Category | Where the city usually comes from | What to check |
City-sliced list products | A stated location in the compiled file | Whether any address backs it, and the compile date |
India private-market databases (PrivateCircle, VCCEdge) | Company records and filings | Whether city means registered office or operating location |
LinkedIn Sales Navigator | A location the person stated on their profile | Whether it is current, and how many records carry no stated city |
Signal-based platforms (Affluense) | Registered addresses, filings and project records, plus wealth events | Per-city refresh date, and how many records carry a recent event |
None of these is wrong. They answer different questions. If you are still choosing a tool rather than auditing one, the comparison of tools for finding HNIs in India covers the wider field. A buyer who knows which question they are asking will choose well. If you are matching a tool to your desk size rather than to a category, the adviser and RIA view splits the same decision three ways.
Frequently asked questions
What is an HNI database by city?
A set of records grouped by location, where the location comes from a registered address, a stated profile field or a project filing. The value depends on which of those it is, because only a registered address can be checked against a public record.
How many millionaire households does Mumbai have?
1,42,000, according to the Mercedes-Benz Hurun India Wealth Report 2025. New Delhi holds 68,200 and Bengaluru 31,600. India as a whole holds 8,71,700.
Which Indian cities hold the most HNI wealth after the metros?
Seven tier-2 cities sit in the top ten by millionaire households: Ahmedabad, Surat, Jaipur, Vadodara, Nagpur, Visakhapatnam and Lucknow. Each sits above several larger and better known cities.
Can a GST number tell you which city a business is in?
No. A GSTIN carries a two-digit state code, a PAN, an entity code and a check digit. It has no city field, so it can place a business in Maharashtra but not in Pune or Nagpur.
Do company records show a city?
Yes. The MCA publishes a registered office address broken into building, area, city, district, state and PIN. Exchange filings carry the same address for listed companies.
Do personal records show a city?
Rarely. MCA public view shows a director's name, DIN, role and appointment date, but often masks the residential address. That is why a city-level claim about individuals needs a specific explanation of where the city came from.
How many cities does Affluense cover?
Eleven metros and more than fifty tier-2 cities. The question worth asking alongside that is what share of records in any one of those cities carries a current contact and a recent event.
How do I check a coverage claim myself?
Pick one city. Ask what field the city comes from, what share has a current contact, the last refresh date for that city, how many records carry an event in ninety days, and whether the count is households or individuals.
Sources
Hurun Research Institute and Mercedes-Benz India. Mercedes-Benz Hurun India Wealth Report 2025. 17 September 2025.
Business Standard. "India adds 4.1 lakh new millionaires since 2021; Mumbai, Delhi lead charge." 18 September 2025.
The Economic Times. "These 7 tier-2 cities mint most millionaires: Mercedes-Benz Hurun India Wealth Report 2025." 18 September 2025.
The Times of India. "India's richest cities: Mumbai tops the list of millionaire households." September 2025.
Ministry of Corporate Affairs. "Company Master Data, Public View." Government of India.
Association of Mutual Funds in India. "List of Top 30 Cities and PIN Codes Mapped to Top 30 Cities." AMFI.
Goods and Services Tax Network. "GSTIN Structure and State Codes." GSTN.

An HNI database by city groups records by where a person lives or where a company is registered. India's millionaire households cluster hard. Mumbai holds 1,42,000 of them and New Delhi holds 68,200. Coverage claims are easy to make and hard to check, so this guide gives you five tests that take about ten minutes each.
Most firms that sell city-level prospect data in India describe their coverage in one word. The word is a city name. On its own, that word carries very little information.
A record can be tied to a city in several ways. It can carry a registered office address. It can carry a location a person typed into a profile. It can carry a district from a project filing. Each of those means something different, and only one of them is a checkable fact.
This guide shows where India's wealth actually sits, which public records can place a person or a company in a city, and how to test any coverage claim you are given.
How is HNI wealth spread across Indian cities?
India had 8,71,700 dollar-millionaire households in 2025. That is 0.31% of all Indian households, and it is up 90% from 4,58,000 in 2021. The figures come from the Mercedes-Benz Hurun India Wealth Report 2025, published on 17 September 2025.
The spread matters more than the total. Wealth sits in a small number of cities and a small number of states.
What does the city table show?
The report ranks cities by millionaire households. These are the figures confirmed in more than one published source.
Rank | City | Millionaire households |
1 | Mumbai | 1,42,000 |
2 | New Delhi | 68,200 |
3 | Bengaluru | 31,600 |
Mumbai carries most of Maharashtra's total. The state figure is 1,78,600, which means the city holds roughly four out of every five millionaire households in the state.
New Delhi here means the city, not the wider National Capital Region. Delhi as a territory is counted at around 79,800. A page about precision should not blur that line, so this guide uses the city figure and says which one it is using.
Why do seven tier-2 cities sit in the top ten?
This is the finding that matters most for coverage. Seven of the top ten cities by millionaire households are not the metros people assume. They are Ahmedabad, Surat, Jaipur, Vadodara, Nagpur, Visakhapatnam and Lucknow.
That list is the reason a page like this has to exist. A firm covering Mumbai, Delhi and Bengaluru and stopping there has covered three cities and missed seven of the ten largest pools. More on where that growth is heading sits in the fifty towns where the next wave of crorepatis will come from.
What do the top ten states account for?
The top ten states hold 79% of all millionaire households in India. Maharashtra leads at 1,78,600. Tamil Nadu holds 72,600, Karnataka 68,800 and Gujarat 68,300.
That concentration is useful for planning. It also explains why state coverage and city coverage get mixed together in vendor claims.
What can this table not tell you?
It cannot tell you how many of those households have a contactable person attached. It cannot tell you when any record was last checked. It cannot tell you whether one household is one person or a family of four.
Those three gaps are the subject of the rest of this page.
What does city coverage actually mean?
Coverage is a measurement. A city name is a label. They are not the same thing, and one is often used to imply the other.
What is the difference between a record and an address?
An address is a fact you can point at. A record is a set of fields. A record with a registered office address in Pune is in Pune in a way that a record with "Pune" typed into a city field is not.
One can be checked against a public register. The other cannot be checked at all.
Why is "we cover fifty cities" not a measurement?
Because it has no denominator and no date. Fifty cities could mean fifty records or fifty thousand. It could mean this week or three years ago.
Our own published coverage runs across eleven metros and more than fifty tier-2 cities. That is a breadth claim, and breadth is not depth. A buyer should ask both questions, including of us. The case for how far that footprint reaches into smaller places is made in why firms keep missing small-city HNIs.
What frame does the finance industry already use for cities?
Mutual fund distribution splits India into the top thirty cities and everything beyond them. AMFI publishes the list of top thirty cities with the PIN codes mapped to each one. It is one recognised way to draw the line, and it is worth knowing when a vendor says "top cities" without naming them.
How often should a city be refreshed?
More often than most vendors will admit, and the right cadence differs by field. A registered office changes when a company moves, which is not often. A phone number changes far more often than that. A directorship changes on the day the filing is accepted.
So one refresh date for a whole record is a weak measure. Ask which fields were refreshed, and when, rather than whether the record was touched at all. A record touched last week carrying a phone number from 2023 is older than it looks.
How would you write a city claim you can defend?
Name one city. Give a number, a date and a source field. Say what share of those records has a current contact.
A claim built that way survives scrutiny. A claim built on a list of city names does not, because there is nothing in it to check.
Which public records in India actually resolve to a city?
This is the part that decides whether a city claim is real. Not every public record carries a city. Some carry a state and nothing finer than that.
Which company records do carry a city?
Company records do. The Ministry of Corporate Affairs publishes each company's registered office address broken into building, area, city or town, district, state and PIN code. That is a full address, and the city inside it can be checked.
Exchange filings carry the same registered office for listed companies. Both are company-level facts, which is the important part.
Which project records do carry a city?
RERA project registrations do. Each registration records the project address, the district, the city or town, and the name of the promoter behind it.
For anyone covering developers, this is the cleanest city-level link available, because it ties a named person to a named project in a named place. It is also why a city query so often leans towards property.
What gives you a state and nothing finer?
GST registration does, and this surprises most people. A GSTIN is fifteen characters. The first two are a state code taken from the Census numbering. The next ten are the PAN of the business. The last three are an entity code and a check digit.
There is no city anywhere in a GSTIN. A Maharashtra GSTIN tells you Maharashtra. It cannot tell you Mumbai rather than Nagpur, and no amount of processing will recover that.
SEBI disclosures work at company and PAN level. They do not place a person in a city either.
Why is a city easy for a company and hard for a person?
Because company records publish an address and personal records mostly do not. MCA public view shows a director's name, DIN, role, appointment date and status. It often masks or omits the residential address, and it never publishes a phone number or an email.
So a vendor claiming city-level coverage over individuals is not getting that city from a registered address. It is coming from somewhere else, and asking where is entirely fair. That question sits underneath how to check whether HNI data is accurate.
How do you test a city coverage claim before you buy?
Five questions, asked in this order, about one city. The answers will tell you more than any sales deck will.
One: does each record carry a registered address or a stated city?
Ask what field the city comes from. If the answer is a registered office, the city is checkable. If the answer is a profile field or an inference, it is a label and it will drift.
Two: what share of records in that city have a current contact?
A record with no working contact is not coverage. It is a row. Ask for the share with a reachable phone or email today, in that one city, and not nationally.
National percentages hide city-level holes. A strong national average can sit on top of a city where almost nothing is current.
Three: what is the most recent refresh date for that city?
Ask for the date, per city. A vendor with a real process knows it without checking. A vendor selling a file will offer a compile date from last year and hope the question moves on.
Four: how many records carry an event in the last ninety days?
An event is a reason to call. A new directorship, a share sale, a project registration, a filing. Records without events are a directory, and a directory does not start conversations. Event-driven prospecting beats a static list for precisely this reason.
Five: are these households or individuals?
India's millionaire count is counted in households. A database is built of people. One household can produce four records or one, and the same household can appear twice under two spellings of the same name.
Ask which unit the vendor counts in. If they count households and sell individuals, the city total and the record total will never reconcile, and the gap will look like missing coverage when it is really two different measurements. For how net worth itself gets estimated when no filing states it, see how to find the net worth of an HNI.
What does a good answer sound like?
A good answer is specific, dated and narrow. It names one city. It gives a number and a date. It states what share has a current contact and what share carries a recent event.
A weak answer is broad, undated and national. It lists fifty city names, quotes one total for the country, and offers no per-city figure at all. The fuller set of buying checks is set out in the HNI database buying guide.
What is actually inside a city-sliced file?
City-sliced contact files are sold as products. They deserve a fair description, because they are one of the things a buyer will run into.
What is the city download product?
It is a fixed file, named after a city and a year, sold once. It arrives as a spreadsheet. The city in the name is the grouping, and the grouping is usually a stated location rather than a registered address.
You get rows. You do not get a refresh process, and you do not get a reason to call any of those rows this month.
Why is a city file not city coverage?
Because a file is a snapshot with a label on it. Coverage is a live process that keeps a city current. A file is a moment that has already passed by the time it reaches you.
Files also travel. The same city file can be sold many times over, which means the people inside it may already have heard from someone else this quarter. That risk is set out in what an intelligence layer adds to raw data.
Which cities should a firm cover first?
Three sensible orders. They often disagree, and when they do, the third one usually wins.
Start where the households are
Mumbai, New Delhi and Bengaluru hold the largest pools. Maharashtra and Gujarat hold the largest state totals. If the goal is raw addressable volume, this order is hard to argue with.
Start where the events are
Events cluster differently from wealth. A city with heavy IPO and funding activity produces more signals per person than a city holding older and quieter money. If your motion depends on having a reason to call, sort cities by signal volume instead of by household count. The HNI migration map shows how quickly those patterns shift.
Start where your own clients already are
The best order is usually the one your own book already describes. A firm with thirty clients in Surat and two in Chennai has a clearer reason to go deep in Surat than any national table can supply. The client side of that picture is on the HNI clients page.
That is why the fifth test matters more than the first three. Who counts as wealthy is settled in how India defines an HNI, and the answer changes what you are counting.
Why does the same city look different in two vendors' claims?
Because they are counting different things inside different boundaries. Neither vendor may be lying, and the numbers still will not match.
Metro boundary or municipal boundary?
Mumbai, Thane and Navi Mumbai sit inside one continuous urban area and outside three separate municipal boundaries. A vendor counting the metro will report far more than a vendor counting the municipal corporation area alone.
Ask which boundary the number uses. That single question explains most of the gap between competing city claims, and it costs one sentence to ask.
Household or individual?
India counts 8,71,700 millionaire households. A people-level database counts people. The two totals are not comparable and should never be placed side by side in the same table.
How do the vendor categories differ?
They differ in where the city field comes from. That is the honest comparison, and it is more useful than a ranking.
Category | Where the city usually comes from | What to check |
City-sliced list products | A stated location in the compiled file | Whether any address backs it, and the compile date |
India private-market databases (PrivateCircle, VCCEdge) | Company records and filings | Whether city means registered office or operating location |
LinkedIn Sales Navigator | A location the person stated on their profile | Whether it is current, and how many records carry no stated city |
Signal-based platforms (Affluense) | Registered addresses, filings and project records, plus wealth events | Per-city refresh date, and how many records carry a recent event |
None of these is wrong. They answer different questions. If you are still choosing a tool rather than auditing one, the comparison of tools for finding HNIs in India covers the wider field. A buyer who knows which question they are asking will choose well. If you are matching a tool to your desk size rather than to a category, the adviser and RIA view splits the same decision three ways.
Frequently asked questions
What is an HNI database by city?
A set of records grouped by location, where the location comes from a registered address, a stated profile field or a project filing. The value depends on which of those it is, because only a registered address can be checked against a public record.
How many millionaire households does Mumbai have?
1,42,000, according to the Mercedes-Benz Hurun India Wealth Report 2025. New Delhi holds 68,200 and Bengaluru 31,600. India as a whole holds 8,71,700.
Which Indian cities hold the most HNI wealth after the metros?
Seven tier-2 cities sit in the top ten by millionaire households: Ahmedabad, Surat, Jaipur, Vadodara, Nagpur, Visakhapatnam and Lucknow. Each sits above several larger and better known cities.
Can a GST number tell you which city a business is in?
No. A GSTIN carries a two-digit state code, a PAN, an entity code and a check digit. It has no city field, so it can place a business in Maharashtra but not in Pune or Nagpur.
Do company records show a city?
Yes. The MCA publishes a registered office address broken into building, area, city, district, state and PIN. Exchange filings carry the same address for listed companies.
Do personal records show a city?
Rarely. MCA public view shows a director's name, DIN, role and appointment date, but often masks the residential address. That is why a city-level claim about individuals needs a specific explanation of where the city came from.
How many cities does Affluense cover?
Eleven metros and more than fifty tier-2 cities. The question worth asking alongside that is what share of records in any one of those cities carries a current contact and a recent event.
How do I check a coverage claim myself?
Pick one city. Ask what field the city comes from, what share has a current contact, the last refresh date for that city, how many records carry an event in ninety days, and whether the count is households or individuals.
Sources
Hurun Research Institute and Mercedes-Benz India. Mercedes-Benz Hurun India Wealth Report 2025. 17 September 2025.
Business Standard. "India adds 4.1 lakh new millionaires since 2021; Mumbai, Delhi lead charge." 18 September 2025.
The Economic Times. "These 7 tier-2 cities mint most millionaires: Mercedes-Benz Hurun India Wealth Report 2025." 18 September 2025.
The Times of India. "India's richest cities: Mumbai tops the list of millionaire households." September 2025.
Ministry of Corporate Affairs. "Company Master Data, Public View." Government of India.
Association of Mutual Funds in India. "List of Top 30 Cities and PIN Codes Mapped to Top 30 Cities." AMFI.
Goods and Services Tax Network. "GSTIN Structure and State Codes." GSTN.